DS-6700HUHI
Series Encoder Quick Start Guide
4
Chapter 3
Activation
3.1
Activating via Web Browser
Steps:
1.
Power on the encoder, and connect the encoder to the network.
2.
Input the IP address into the address bar of the web browser, and click Enter to enter the activation interface.
The default IP address of the network encoder is 192.168.1.64. You are recommended to change the default IP
address after your access.
Figure 3. 1
Activation Interface
3.
Create a password and input the password into the
Password
text field.
STRONG PASSWORD RECOMMENDED
– We highly recommend that you create a strong password
of your own choosing (using 8-16 characters, including upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product. And we recommend that you reset your
password regularly, especially in the high security system, resetting the password monthly or weekly can better
protect your product.
4.
Confirm the password.
5.
Click
OK
to activate the device.
3.2
Activating via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the software according to the prompts.
Follow the steps to activate the camera.
Steps:
1.
Run the client software and the control panel of the software pops up, as shown in the figure below.
