HIKVISION DS-3D2208P, Установка оборудования

Страница: 3 / 22

DS-3D2208P Hardware Installation
Manual
- 1 -
DS-3D2208P Switch
The document describes the characteristics and parameters of DS-3D2208P and gives
an overview of DS-3D2208P.
Standard Configuration
The standard port settings of DS-3D2208P consists of 8 100M-Ethernet RJ45 ports, 2
gigabit-Ethernet RJ45 ports, 2 gigabit-Ethernet SFP optical ports and 1 Console port.
For details, see table 1-1.
Table 0-1 Attributes of the necessary port
Port Attribute
100M-Ethernet port
UTP (RJ45) port with the LINK/ACT LED, which
can be powered through the PoE mode and has
the PoE LED
1000M Ethernet port
SFP port and UTP port (RJ45), having LINK/ACT
LEDs
Console port An RJ45 port with a rate of 9600 bps
Figure 0-1 Front faceplate of the DS-3D2208P switch
Table 0-2 Parts at the front faceplate of the DS-3D2208P switch
No. Abbrev. Name Remarks
1 PWR Power LED
If the switch is powered on, the LED is
on.
2 SYS System LED
If the LED is always on, the system is
being started.
If the LED flickers, the system works
normally.
3 CONSOLE Console port Manages the switch locally.
4 2 gigabit electric ports
5 2 gigabit optical ports