DS-3D2208P
Hardware
Installation
Manual
- 14 -
3
Receiving the normal phase
of the data
RX+
6
Receiving the paraphase of
the data
RX-
Connecting the 1000M-Ethernet Electric Port
DS-3D2208P provides 2 10/100/1000MBase-T ports, each of which corresponds to an
LED that shows the link/ACT state of each port. If the LED is always on, it means the
port is linked. If the LED flickers, it means that the data is transmitted through the port.
Figure 0-8 Connecting the 1000Base-T port and other Ethernet terminals
Both the connection method and the connection diagram of the 1000M-Ethernet port
are same to those of the 100M-Ethernet port, but the definition of the RJ45 signal of
the 1000M port has to be distinguished.
Table 0-3 Definition of the pins of the 1000M RJ45 port
No.
Pin Name
Symbol
1
Sending and receiving the
normal phase of data 0
TP0+
2
Sending and receiving the
paraphase of data 0
TP0-
3
Sending and receiving the
normal phase of data 1
TP1+
4
Sending and receiving the
paraphase of data 1
TP1-
5
Sending and receiving the
normal phase of data 2
TP2+
6
Sending and receiving the
TP2-
