Screw Hole
Cable
Hole
Figure 2-5
The Drill Template
3.
Disassemble the inclined ceiling mount by the screw
driver.
4.
Install the turret camera’s mounting base on the
inclined ceiling mount’s cover with three PM4 screws.
Figure 2-6
Install
Turret
Camera’s Mounting Base
5.
Install the inclined ceiling mount’s body on the
ceiling/wall with four PA4
×
25 screws, as shown in
Figure 2-8.
Figure 2-7
Fix the Inclined Ceiling Mount’s Body
6.
Combine the inclined ceiling mount’s cover with its
body with supplied screws.
7.
Repeat steps 5 to 8 of the 2.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
Figure 2-8
Fix the Camera to the Inclined Ceiling Mount
2.3
Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box separately.
Steps:
1.
Paste the drill template on the ceiling/wall.
