HIKVISION DS-2AE7232TI-A Скачать руководство пользователя страница 35

Страница: 35 / 46

HD-TVI Speed Dome DS-2AE7232TI-A User Manual

UM THD DS-2AE7232T-x 020519NA

Choose the zone number:

Move the cursor to

ZONE NUM.

and click

IRIS+

button to enter the editing mode.

Click the up and down buttons to select the zone number to be configured.

Click

IRIS+

again to confirm the settings and exit the editing mode of this column.

NOTE:

Up to eight zones can be configured.

Configure the zone area.

Move the cursor to

EDIT ZONE

and click

IRIS+

button to enter the editing mode.

You can see

SET LEFT LIMIT

on the screen. Click the direction buttons to set the left limit.

Follow the prompts on the screen to set the right limit.

Click

IRIS+

button to save the settings and exit.

Set the zone status and scan status.

•

ZONE STATUS:

The zone status just indicates the current status of the zone.

•

SCAN STATUS:

You can set the scan status to

ON/OFF

to enable/disable the scanning in the zone.

NOTE: ZONE STATUS

is not editable. After you edit the zone, it will switch to

automatically; if you

delete the zone, the

ZONE STATUS

will switch to

OFF

Clear the zone settings. Move the cursor to

CLEAR ZONE

, click

IRIS+

to clear all the settings of the

current zone, and click

IRIS+

again to confirm the settings and exit.

Configuring Smart Settings

Purpose:

Set the smart settings to

to automatically track the moving object, and meanwhile adjusts the focus

and the position to set the target in the center of the field of view.

Move the cursor to enter the smart setting submenu:

MAIN MENU > DOME SETTINGS > SMART SETTINGS

Содержание DS-2AE7232TI-A















































Результаты поиска

Содержание DS-2AE7232TI-A

Отзывы:

HIKVISION DS-2AE7232TI-A, Руководство пользователя, Страница: 35 / 46

Результаты поиска

Содержание DS-2AE7232TI-A

Отзывы: