HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA
32
3.
Edit the pattern.
A.
Move the cursor to
RECORD PATTERN
and click
IRIS+
to enter editing mode.
Figure 17, Edit the Pattern
B.
Click the PTZ control buttons and direction buttons to operate the speed dome to draw a
movement path, including pan scan, tilt scan, zoom in, zoom out, etc. The speed dome can
automatically memorize the path you operated as a pattern.
C.
Click
IRIS+
again to save the pattern and exit editing mode.
•
REMAIN MEMORY
indicates the remaining memory of the speed dome for configuring the patterns.
When it reaches 0, no more patterns can be configured. You can also see the remaining memory
shown under
PATTERNS
menu as
REMAINING
.
•
The pan/tilt movements and the lens operations cannot be memorized simultaneously.
4.
Preview the pattern. Enter the
PREVIEW
menu to preview the current pattern.
5.
Call the defined pattern. You can call the special presets to call the defined pattern. E.g. call preset 41
to call pattern 1. Please refer to
Section 2.2
to find the corresponding preset number for each pattern.
6.
Delete the patterns.
A.
To Delete a Chosen Pattern: Click
IRIS+
to enter
RECORD PATTERN
and you can see
DEL PATH ABOVE
.
Click
IRIS+
to delete the pattern.
NOTE:
If you delete the current pattern, the following pattern will also be deleted. E.g., if pattern 2
is deleted, pattern 3 and pattern 4 will be deleted as well.
B.
To Clear All the Patterns: Enter
CLEAR
menu and click
IRIS+
to delete all the defined patterns.