HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA
27
Figure 12, PTZ Configuration
•
Auto-Flip:
In manual tracking mode, when a target object goes directly beneath the speed dome,
the speed dome automatically rotates 180 degrees horizontally for tracking.
NOTE:
AUTO-FLIP
is set to
ON
for this speed dome by default and is not user-definable.
•
Proportional Pan:
When the speed dome is zooming in/out, you can enable the proportional pan
function to automatically reduce or increase the panning and tilting speed according to the zoom
amount. This function enables the speed dome to trace the object at a proper speed when the
speed dome is zooming and the monitored scene is narrowed (zoom in) or enlarged (zoom out).
You can set
PROPORTIONAL PAN
to
ON
or
OFF
to enable/disable the function.
NOTE:
This function is enabled automatically when setting the patterns.
Park Time and Actions
Purpose:
This feature allows the speed dome to start a predefined action (park action: scan, preset, pattern, etc.)
automatically after a period of inactivity (park time).
You can set
PARK TIME
from 5 to 720 seconds and set the park action (
PARK ACT
) as preset 1 to 8, pattern
1 to 5, patrol 1 to 10, pan scan, tilt scan, panoramic scan, day mode, night mode, or none.
NOTE:
If no control signal is received after the park time under the following circumstances, no
park actions will be performed: in the process of performing dome actions by calling special
presets, or in the process of performing external alarm linkage actions.
•
Image Freeze:
This feature enables live view to switch directly from the current scene to another scene
that is defined by a preset, without showing the middle areas between these two scenes. It reduces
the use of bandwidth in a digital network system and also provides privacy protection for the middle
areas. You can set
IMAGE FREEZE
to
ON
or
OFF
to enable or disable this function.
NOTE:
The function varies by camera model.
PTZ Speed
Purpose:
You can define the speed of the dome movements.