HIKVISION Door Station, Быстрый старт

Страница: 35 / 56

Figure 3-27 Fix the Gang Box
6. Fill and level up the gap between the gang box and wall with concrete. Remove
the mounting ears with tool after concrete is dry.
Figure 3-28 Remove the Mounting Ears
7. Connect wires and insert the modules.
1) Connect Cable 1 and one end of Cable 2 to the corresponding interfaces of
the Main Unit, then place the Main Unit into the upper grid.
2) Connect the other end of Cable 2 to the input interface of Sub Module 1.
Connect one end of Cable 3 to the output interface of Sub Module 1 and
insert it into the middle grid.
3) Connect the other end of Cable 3 to the input interface of Sub Module 2.
Insert it into the bottom grid.
Module Door Station Quick Start Guide
29