HIKVISION DeepinMind iDS-6700NXI Series, Руководство пользователя

Страница: 66 / 83

DeepinMind Series NVS User Manual
iDS-67 00 Deep inMind Series NVS User Manua l
65
Click Stop Drawing when finish drawing.
5) Drag the slider to set the sensitivity value.
Sensitivity : Range [1-100]. Sensitivity stands for the percentage of the body part of
an acceptable target that enters the pre-defined region.
Sensitivity = 100 – S
1
/S
T
*100
S
1
stands for the target body part that enters the pre-defined region S
T
stands for the
complete target body.
Example: if you set the value as 60, the action can be counted as an region entrance
action only when 40 percent body part enters the region.
The Sensitivity of the detection is supported by certain models. Refer to actual display for details.
6) Repeat the above steps to configure other regions. Up to 4 regions can be set. You can
click
Clear to clear all pre-defined regions.
Step 5 Click Arming Schedule to set the arming schedule.
Step 6 Click Linkage Method to select the linkage methods.
Step 7 Click Save .
6.2.6 Configuring Region Exiting Detection
Region exiting detection function detects people, vehicle or other objects which exit from a
pre-defined virtual region, and some certain actions can be taken when the alarm is triggered.
Step 1 Go to Configuration > Event > Smart Event > Region Exiting Detection .
Step 2 Check Enable Region Exiting Detection to enable the function.
Step 3 Select the Target for Detection to Human, Vehicle, or both.

Human Body : Discard non-human body pictures and videos which are not triggered by
line crossing detection.

Vehicle: Discard non-vehicle pictures and videos which are not triggered by line crossing
detection.