E Series Network Speed Dome
·
Quick Start Guide
15
2.2.2
In-ceiling Mounting
Note:
The height of the space above the ceiling must be more than 250 mm.
The thickness of the ceiling must range from 5 mm to 40 mm.
The ceiling must be strong enough to withstand more than four times the weight of
the speed dome and the accessories.
DE4xxxI Series (IR) Type I Speed Dome
Steps:
1.
Install the memory card.
Note:
Refer to
step 1
in
Section 2.2.1 Wall Mounting
.
2.
Drill screw holes in the ceiling.
1)
Attach the drill template to the ceiling where you want to install the speed
dome.
2)
Cut a hole and drill screw holes according to the drill template.
Note:
±2 mm of the circle diameter is tolerable.
3.
Route the cables through the ceiling for the speed dome.
4.
Install the toggle bolts.
1)
Remove the toggle from the toggle bolt.
2)
Insert the bolts into the screw holes on the speed dome.
3)
Rotate the bolts through the screw holes.
4)
Install the toggles back as shown in Figure 2-20.
Toggle
Bolt
Figure 2-20
Install the Toggle Bolts
5.
Install the speed dome to the ceiling.
1)
Align the toggle bolts with the screw holes on the ceiling.