E Series Network Speed Dome
·
Quick Start Guide
10
2)
Cut a hole and drill screw holes according to the drill template.
Note:
±2 mm of the circle diameter is tolerable.
4.
Install the toggle bolts.
1)
Remove the toggle from the toggle bolt.
2)
Insert the bolts into the screw holes on the speed dome as shown in Figure 2-10.
Toggle Bolt Holes
Figure 2-10
Toggle Bolt Holes
3)
Rotate the bolts through the screw holes.
4)
Install the toggles back as shown in Figure 2-11.
Toggle
Bolt
Figure 2-11
Install the Toggle Bolts
5.
Install the speed dome to the ceiling.
1)
Align the toggle bolts with the screw holes on the ceiling.
2)
Push the speed dome to the mounting hole on the ceiling.
3)
Rotate the bolts again. The toggle will automatically rotate down to secure the
speed dome to the ceiling.