E Series Network Speed Dome
·
Quick Start Guide
8
3)
Attach the gasket and the bracket to the wall by aligning the four screw holes on
the bracket with four expansion screws on the wall.
4)
Secure the bracket with four hex nuts and washers.
Figure 2-5
Secure the Bracket
3.
Install the speed dome to the bracket.
1)
Hook the two ends of the safety rope to the speed dome back box and the
bracket respectively as shown in Figure 2-6.
Safety Rope
Figure 2-6
Safety Rope
2)
Route the cables through the bracket and connect the corresponding cables.
3)
Loosen the lock screws on the bracket.
4)
Align the speed dome with bracket and rotate it to the bracket counterclockwise
or clockwise tightly as shown in Figure 2-7.
Push
Rotate
Lock Screw
Figure 2-7
Align to the Bracket