UM ColorVu DS-2CExxDFT-Fxx 122919NA
5
Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12 VDC
according to the IEC60950-1 standard. Refer to
technical specifications for detailed information.
Do not connect multiple devices to one power adapter
to avoid overheating or a fire hazard caused by overload.
Make sure that the plug is firmly connected to the power
socket.
Make sure that the device is firmly fixed if wall mounting
or ceiling mounting is used.
If smoke, odor, or noise rise from the device, turn off the
power at once, unplug the power cord, and contact the
service center.
Never attempt to have the camera disassembled by
unprofessional personnel.
Cautions
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers.
Do not place the camera in extremely hot, cold (the
operating temperature shall be -40° to 60° C), dusty, or
damp locations, and do not expose it to high
electromagnetic radiation.
If cleaning is necessary, use a clean cloth with a bit of
ethanol, and wipe it gently.
Do not aim the camera at the sun or extra bright places.
The sensor may burn out by a laser beam, so if any laser
equipment is in use, make sure that the surface of the
sensor will not be exposed to the laser beam.
Do not expose the device to high electromagnetic
radiation or an extremely hot, cold, dusty, or damp
environment.
To avoid heat accumulation, good ventilation is required
for the operating environment.
Keep the camera away from liquid while in use for a non-
waterproof device.
While in delivery, the camera shall be packed in its
original, or similar, packing.
Mark Description
Table 0-1 Mark Description
Mark
Description
DC Voltage
