HIKVISION AX PRO Series Скачать руководство пользователя страница 6

7

Opera�on Cau�on and Device Maintenance

- All the electronic opera�on should be strictly compliance with the electrical safety regula�ons, fire preven�on 

regula�ons and other related regula�ons in your local region.

- Do not drop the device or subject it to physical shock, and do not expose it to high electromagne�sm radia�on. 

Avoid the equipment installa�on on vibra�ons surface or places subject to shock (ignorance can cause equipment 

damage).

- Please make sure that the power has been disconnected before you wire, install or dismantle the device.

- If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then 

please contact the service center.

- Do not drop the device or subject it to physical shock, and do not expose it to high electromagne�sm radia�on. 

Avoid the equipment installa�on on vibra�ons surface or places subject to shock (ignorance can cause equipment 

damage).

- Do not place the device in extremely hot (refer to the specifica�on of the device for the detailed opera�on 

temperature), cold, dusty or damp loca�ons, and do not expose it to high electromagne�c radia�on.

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

6

Func�on

Descrip�on

Swinger limit ac�va�ons

Set the limit �mes of swinger ac�vi�on.

LED

Turn On/Off the LED.

Polling Rate

Set the interval of heartbeat.

Signal Strength Test

Enter the test mode, and view the LED 

indica�on.

Detec�on Zone Test

Enter the test mode, and start walk test.

Bypass

Slide to green to bypass the zone.

Double Knock

Slide to green to make the zone alarm

with double knock.

Cross Zone

If the alarm triggered in both of the linked 

zones within the set �me, two alarm 

messages will be reported.  

Sounder Delay Time 

Set the delay �me. The sounder will be triggered 

immediately or a�er the set �me.

Link Camera

Link with a camera for intruder verifica

ti

on.

Find Me

Tap Find Me to make peripherals find the zone.

Содержание AX PRO Series








Отзывы: