Diagram References
E N G L I S H
DS-19K00-Y
Wireless Keyfob
1
2
3
Control Panel x 1
Detector x 1
Keyfob x 1
Power Adapter x 1
Screw x 4
IC Card in Special Shapes x 5
Quick Start Guide x1
2
1
4
4
2
5
2
6
2
2
2
3
Specification
2
1
2
2
2
3
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to the Axiom Security Control Panel Kit.
updates or other r
ea o
ea e fi
e
atest version in the company website
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement and other Hikvision’s trademarks and
Components
Diagram References
E N G L I S H
DS-PD1-MC-WWS
2
3
1
2
3
4
1mm
This product and - if applicable - the supplied accessories too
are marked with "CE" and comply therefore with the applicable
The sensor can detect the door or window opening. When the door or
window is open, an alarm will be triggered and it will be sent to the alarm
center or mobile client via security control panel.
a o e
Tamper Alarm: When removing the sensor, an alarm will be triggered.
detector. And you can add the detector accroding to the voice prompt.
Note: The distance between the security control panel and the detector should be
less than 50 cm.
Register the Detector Locally
Register the Detector via APP
1. Check Signal Strength
Detector indicator turns green: Strong Signal.
Detector indicator turns red: Weak Signal
1. Log in to the APP Store and input “Hik-Connect” to search the mobile client.
5. Log in the Hik-Connect and tap the icon “+” at the upper-right coner of the
Hik-Connect page to add the security control panel. You can scan the QR code
on the device rear panel or on the package box, or input the device serial No.
2. Download and install Hik-Connect to your phone.
4. Power on the security control panel.
Indicator
Red ligh
a e
Display Signal Strength:
Under the signal strength checking mode:
Green - Strong Signal
Red - Weak Signal
Tamper
If the detector is disassembled, an alarm will be triggered.
2. Install the Detector
Paste the sponge tape on the rear side of the detector.
Paste the detector on the required place.
Note: To make the TAMPER work properly, the thickness of the sponge tape
should be no more than 1mm.
1
3
2
4
Appearance
1
Detector Power On
2
4
3
a
b
2. Assemble the front panel and rear panel by align ingthe Indicator groove on
the front panel with the Indicator light pipe on the rear panel.
1. Dig the groove to disassemble the device. Remove the front and
Note: Do not disassemble the device with sharps.
3. Paste the sensor at the door or window’s edge. Make sure the sensor is
aligned with the door or window’s edge.
Specification
1
2
3
4
Indicator
Press the Key
Arm
Indicator
Disarm
Clear
Stay
Panic (Hold for 2s)
1. Dig the groove to disasemble the device. Remove the front and rear panel.
Note: Do not disasemble the device with sharps.
2. Assemble the front panel and rear panel.
2
1
2
2
2
3
2
4
2
5
2
6
Appearance
1
2
3
Add Keyfob
You can add keyfob to the security control panel via the web client of the
control panel.
1. Click Syst
e
Keyfob to enter the Keyfob Management page.
2. Click Add and press any key on the keyfob.
3. Set the keyfob parameters.
4. Click OK.
Delete Keyfob
On the Keyfob Management page, you can delete a selected keyfob or check
control panel, which allows you to add the keyfob to another control panel.
Frequency
433MHz
Modula on
2GFSK
Transmission Distance
300m (Open Area)
Indicator
LED
Red: Press the Key
Green: Successful Opera on
Power Supply
Ba ery
CR2032 3.0V
Temperature
–10
℃
to 55
℃
Humidity
10% to 90%
Dimension(W*H*D)
63.3*48.7*16.3mm
Weight
24.5g
Wireless
Materials and Environment
Frequency
433MHz
Modula on
2GFSK
Transmission Distance
800m (Open Area)
Indicator
LED
1(Dual-Color)
Power Supply
Ba ery
CR123A
Tamper
Tamper
Supported
Temperature
–10
℃
to 55
℃
Humidity
10% to 90%
Dimension(W*H*D)
25 x 84 x 20.99mm
Weight
37.0g
Wireless
Materials and Environment