On the Hik-Connect page, tap a security control device to enter
the control panel management page. Tap Away/Stay/Disarm to
control the partition's status.
You can also tap Clear Alarm to clear the alarm when an alarm is
triggered.
Figure 2-4 Control Panel Management Page
Bypass Zone
When the partition is armed, you can bypass a particular zone as
you desired.
Before You Start
Link a detector to the zone.
Steps
1. Select a zone in the Zone tab of the Partition page.
2. Select a zone and enter the Settings page.
Figure 2-5 Zone Settings Page
3. Enable Zone Bypass and the zone will be in the bypass status.
57
