6
English
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
UM 22VYST / UM 16VST2 / UM 12VST2:
Mixer
To reduce the risk of injury, user must read
instruction manual.
Switching ON
SPECIFICATIONS
Model
UM 22VYST
UM 16VST2
UM 12VST2
Voltage (by areas)*
230 V
Power input*
1800 W
1600 W
1200 W
Speed change
1
2
1
2
1
2
No load speed
150 – 300 /min 300 – 650 /min 150 – 300 /min 300 – 650 /min 150 – 300 /min 300 – 650 /min
Stirrer paddle
220 mm (135 mm × 2)
160 mm
120 mm
Weight
6.4 kg
5.7 kg
5.4 kg
* Be sure to check the nameplate on product as it is subject to change by areas.
Electronic control
○
Soft start
Reduces recoil against the operator by managing the number of rotations during startup.
○
0 Voltage Re-start Protection
The 0 voltage restart protection feature prevents the power tool from restarting after the power has been temporarily cut
o
ff
during operation.
○
Variable speed
○
Overload protection
This protection feature cuts o
ff
the power to the motor in the event of overloading of motor or a conspicuous reduction in
rotational speed during operation.
When the overload protection feature has been activated, the motor may stop.
In this case, release the tool switch and eliminate causes of overloading.
After that you can use it again.
NOTE
Due to HiKOKI’s continuing program of research and development, the speci
fi
cations herein are subject to change
without prior notice.
Switching OFF
Disconnect mains plug from electrical outlet
Class
II
tool (Double insulation)
STANDARD ACCESSORIES
UM 22VYST UM 16VST2 UM 12VST2
Stirrer
paddle (mm)
∅
135 × 2
∅
160 × 1
∅
120 × 1
Extension
bar (mm)
—
L185
—
Standard accessories are subject to change without notice.
APPLICATIONS
Mixing pulverised building materials such as mortar,
plaster, adhesives, as well as solvent-free paint, varnish
and similar substances.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements speci
fi
ed on the product
nameplate.
2. Trigger
Ensure that the trigger is in the OFF position. If the plug
is connected to a receptacle while the trigger is in the ON
position, the power tool will start operating immediately,
inviting serious accident.
3. Extension cord
When the work area is removed from the power source,
use an extension cord of su
ffi
cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
000Book̲UM22VYST.indb 6
000Book̲UM22VYST.indb 6
2019/05/31 15:15:02
2019/05/31 15:15:02
