HIKOKI UL 18DA, Инструкция по эксплуатации, Страница: 38 / 48

English
38
CHARGING
Presented below are the combination of functions for power source, battery charging, and
cooling/heating.
Power Source Status Power Switch Battery Charge
Operation of
Cooling / Heating
Function
Connected to a power source
(household outlet or car outlet)
and with battery installed
OFF –
ON
1. Connect to a power source (using either an AC adapter or DC cord).
2. Install a battery.
The charge lamp will continuously light green and the charging begins.
3. Turn the power switch ON to conduct charging with either cooling or warming.
NOTE
With a battery installed, disconnecting the AC adapter or DC cord from the power source
will switch o ff the cooling/heating function.
To switch the power supply to the battery, press the power switch.
When the power is switched ON, the cooling/heating function will begin operating once
again.
4. Charge complete
The charge lamp will repeatedly blink green to indicate that the charge is complete.
Disconnect the AC adapter or DC cord from the power source and remove the battery.
5. Charge indicator lamp indication
The indications of the charge indicator lamp will be as shown in Table 2 , according to the
condition of the charger or the rechargeable battery.
000Book̲UL18DA̲ChS.indb 38 000Book̲UL18DA̲ChS.indb 38 2018/07/19 14:04:41 2018/07/19 14:04:41