HIKOKI SP 18SB, Инструкция по эксплуатации

Страница: 5 / 24

English
5
PRECAUTIONS ON USING POLISHER
1. Do not leave the revolving polisher unattended on the
fl oor.
2. Always hold the body handle and side handle of the
polisher fi rmly.
Otherwise the counterforce produced may result in
inaccurate and even dangerous operation.
SPECIFICATIONS
Voltage (110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
Power Input* 705 W
No-Load Speed 2000/min.
Weight (only main body)
2.1 kg
* Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) 180mm Wool Bonnet ................................................... 1
(2) Rubber Pad .................................................................. 1
(3) Wrench ........................................................................ 1
(4) Side Handle ................................................................. 1
180 mm Wool bonnet is not included for some area.
Standard accessories are subject to change without
notice.
APPLICATIONS
○
Polishing or shining painted metal surfaces, such as
those of automobiles, trains, elevators, refrigerators,
sewing machines, washing machines, metal appliances,
etc.
○
Polishing varnished surfaces of wooden furniture, etc.
○
Shining synthetic resin or ebonite products.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements speci fi ed on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position. If the
plug is connected to a receptacle while the power switch
is in the ON position, the power tool will start operating
immediately, inviting serious accident.
3. Extension cord
When the work area is removed from the power source,
use an extension cord of su ffi cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
CAUTION
Damaged cord must be replaced or repaired.
4. Fixing the side handle
Screw the side handle into the housing.
5. Con fi rm the lock lever
Con fi rm that the lock lever is disengaged by pushing lock
lever two or three times before switching the power tool
on (See Fig. 1 )
6. Install the air cover on the air vent on the side where the
side handle is attached to divert the cooling air fl ow of
the motor during operation as much as possible. Hook
tab of the air cover to the air vent and push in the tab
when installing. Use a screwdriver etc. to pull as shown
in Fig. 3 when removing.
MOUNTING AND DISMOUNTING THE WOOL
BONNET (Fig. 1)
CAUTION
Be sure to switch power OFF and disconnect the plug
from the receptacle to avoid serious trouble.
1. Mounting
(1) Attach the washer nut on the rubber pad.
(2) While pushing the lock lever with one hand, lock the
spindle by turning the rubber pad slowly with the other
hand.
Tighten the washer nut by using the supplied wrench.
(3) Cover the rubber pad with the wool bonnet.
Pull the string of the wool bonnet, let it contact the rubber
pad, and tie the string up. Then, tuck the knot and the
remainder of the string into the wool bonnet. (See Fig. 2 )
CAUTION
○
Improper fi tting of the wool bonnet may cause vibration.
○
Con fi rm that the lock lever is disengaged by pushing lock
lever two or three times before switching the polisher on.
2. Dismounting
To remove the wool bonnet, follow the above precedures
in reverse.
PRACTICAL POLISHER APPLICATIONS
1. Curved surface as well as plain one is treated for
fi nishing. It is recommended to hold the polisher without
pushing on the material, and make the best of the weight
of the machine alone. As the excessive pressure on the
polishing surface will not only bring unsatisfactory result
but also apply overload on the motor.
2. Depending on the fi nishing degree of the surface, use
the polishing compound or wax. In order to attain the
maximum polishing e ff ect, fi rst polish the surface with
the fi ne sand paper using the sander, than polish it with
the polishing compound using the wool bonnet, and than
fi nish with wax. Apply a small quantity of the compound
and wax to the surface, and polish with the wool bonnet.
000Book̲SP18SB̲ChTA.indb 5 000Book̲SP18SB̲ChTA.indb 5 2018/03/14 12:10:53 2018/03/14 12:10:53