English
14
(4) Install the
fi
lter (
Fig. 9
)
Fit
the
fi
lter over the
fi
lter holder.
(5) Install the pre-
fi
lter (
Fig. 10
)
When installing the pre
fi
lter, press the
housing on with the projections in a horizontal
position. Then, turn the pre-
fi
lter until the
projections are
fi
xed in the grooves of the
housing.
(6) Install the dust case (
Fig. 11
)
Place the dust case over the housing, making
sure that the protruding marks on both are
aligned. Then, turn the dust case clockwise for
approximately 120 degrees.
THE SWITCH PANEL
CAUTION
Do not subject the switch panel to shock or damage.
1. Switch operation (
Fig. 12
)
The vacuum of the appliance can be switched
between three stages of operation, depending on
your need.
When the power is o
ff
, pressing the 3 button or
the 2 / 1 button will switch the appliance on. At the
same time, the LED light will switch on. To switch
between MID mode and LOW mode, press the 2 / 1
button.
To suppress noise when using the appliance, switch to 1 mode.
To shut o
ff
the appliance, press the Ø button. This will also switch o
ff
the LED light.
* The dust case can also
be installed with the
nozzle facing upwards.
Fig. 11
Protruding
Marks
1
Align the
protruding
marks
Dust Case
Housing
2
Turn clockwise for
approximately 120
degrees
Dust Case
Dust Case
Pre Filter
Projections
Fig. 10
1
Push in
2
Turn to
secure
Hold here
Housing
Grooves
Fig. 9
Filter
Filter Holder
OFF Button
Fig. 12
Switch Panel
Indicator Lamp
HIGH Mode
MID/LOW Mode
000Book̲R18DA̲ChS.indb 14
000Book̲R18DA̲ChS.indb 14
2018/04/27 9:42:03
2018/04/27 9:42:03
