HIKOKI R 18DA, Инструкция по эксплуатации

Страница: 15 / 60

English
15
Mode
Continuous operating time
BSL1830 BSL1850
3 (HIGH) Approx. 24 min. Approx. 40 min.
2 (MID) Approx. 29 min. Approx. 48 min.
1 (LOW) Approx. 40 min. Approx. 66 min.
∗ Continuous operating time will vary according to battery
condition. Please use the table as a guideline.
2. The Indicator Lamp ( Fig. 13 )
When the battery supply is low during operation of the
appliance, the indicator lamp will light up. When this occurs,
please recharge the appliance.
HOW TO USE
WARNING
To prevent accidents when installing or removing the rechargeable battery, make
sure that the appliance is switched o ff .
CAUTION
○ Make sure that the rechargeable battery is properly
installed. If not properly installed, the battery may
fall out, causing injury.
○ Make sure the fi lter and pre fi lter is installed when
operating the appliance. Failure to do so may
result in injury or malfunction.
1. Verify the fi lter ( Fig. 14 )
Check to make sure the fi lter is installed.
2. Attach the nozzle ( Fig. 15 on page 16 )
Depending on the operation, insert the nozzle to the intake port of the appliance. The
appliance can be used without a nozzle.
NOTE
When attaching the nozzle or extension pipe, insert as you twist in the direction indicated by
the arrow. ( Fig. 16 on page 16 )
Twist in the direction indicated by the arrow when detaching as well.
Twisting in the opposite direction could result in detaching the dust case from the housing.
Indicator
Lamp
3
2
1
Ø
Fig. 13
Fig. 14
Pre Filter
Dust Case
Filter
000Book̲R18DA̲ChS.indb 15 000Book̲R18DA̲ChS.indb 15 2018/04/27 9:42:04 2018/04/27 9:42:04