English
4
DEMOLITION HAMMER SAFETY WARNINGS
1.
Wear ear protectors.
Exposure to noise can cause hearing loss.
2.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3. Wear protective glasses to protect your eyes.
4. Wear a mask when turning your head upward.
5. Properly set the stop lever.
○
Bushing Hammer
(for roughing concret e and stone surfaces)
(Code No. 955183)
○
Shank (for rammer and bushing hammer)
(Code No. 955625)
• Bushing Shank
• Shank
○
Scoop
(for digging ground in various foundation work)
(Code No. 980034)
○
Electric Hammer Oil (one liter)
(Code No. 955009)
Optional accessories are subject to change without notice.
6. Since the bit becomes very hot during operation, exercise
extremes very hot.
7. Safe operation depends on one’s stable posture.
8. At the start of work, con
fi
rm the oil supply and screw
tightening.
9. When working at a highly elevated location, pay attention
to articles and persons below.
10. Before starting breaking or chipping a wall,
fl
oor, or
ceiling, thoroughly con
fi
rm that no items such as an
electric cable or conduit are buried inside.
11. Wear protective shoes to protect your feet.
SPECIFICATIONS
Voltage (by areas)*
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
Power Input
1140 W*
Full-load impact rate
2100/min
Weight (without cord)
8 kg
* Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Case .............................................................................1
(2) Bull Point (Total Length 320 mm) ..................................1
(3) Side Handle ..................................................................1
(4) Oil Feeder .....................................................................1
(5) Hexagon Bar Wrench ....................................................1
(6) Wrench .........................................................................1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
○
Bull Point (for crushing)
Total length
450 mm
Code No.
955623
○
Cutter (for crushing asphalt)
(Code No. 955629)
○
Cold Chisel
(for grooving and squaring)
Total length
320 mm 450 mm
Code No.
955614 955624
○
Rammer
(for tamping sand and gravel)
(Code No. 955181)
000Book̲H50̲Asia.indb 4
000Book̲H50̲Asia.indb 4
2018/03/22 14:30:40
2018/03/22 14:30:40
