English
48
BATTERY REMOVAL/INSTALLATION
1. Battery
removal
Hold the handle tightly and push the battery latches to
remove the battery (see
Fig. 5
).
CAUTION
Never short-circuit the battery.
2. Battery
installation
Insert the battery while observing its polarities
(see
Fig. 5
).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 6
.
3. Charging
When inserting a battery in the charger, the charge indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge indicator lamp will light up in green.
(See
Table 2
)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as shown in
Table 2
, according to the
condition of the charger or the rechargeable battery.
Latch
Battery
Pull out
Insert
Push
Fig. 5
Fig. 6
Battery
Charger
Charge
indicator lamp
00Book̲G3610DVE̲ChS.indb 48
00Book̲G3610DVE̲ChS.indb 48
2022/08/26 16:18:37
2022/08/26 16:18:37
