English
54
Blinks ;
Output suspended due to high temperature. Remove the battery
from the tool and allow it to fully cool down.
Blinks ;
Output suspended due to failure or malfunction. The problem may
be the battery so please contact your dealer.
As the remaining battery indicator shows somewhat di
ff
erently depending on ambient
temperature and battery characteristics, read it as a reference.
NOTE
Do not give a strong shock to the switch panel or break it. It may lead to a trouble.
9. About the mode change function
The unit has “Transmission mode” and “Auto mode”.
The mode can be switched by pressing the Auto mode switch.
Adjust the number of revolutions in Transmission mode using
the dial, while referring to the
Table 5
. (
Fig. 11
)
○
With Transmission mode, the grinder’s number of revolutions
can be set at one of six stages.
When operating in Transmission mode, the set number of
revolutions will be maintained regardless of changes in load.
○
With Auto mode, you can lower noise and vibration by
lowering the maximum number of revolutions while in a no-
load state.
While in Auto mode, the number of revolutions will be raised if
the load becomes greater during operation.
On the other hand, the number of revolutions will be lowered if
the load decreases during operation. (
Table 5
)
○
Set the mode and dial according to work application.
NOTE
Do not give a strong shock to the switch panel or break it. It may lead to a trouble.
Fig. 11
Auto mode switch
Switch panel
Dial
00Book̲G3610DVE̲ChS.indb 54
00Book̲G3610DVE̲ChS.indb 54
2022/08/26 16:18:38
2022/08/26 16:18:38
