5
English
n
0
No-load speed
/min
Oscillation per minute
Bpm
Impact rate
Ls
Low speed
Hs
High speed
Brick
Wood
Metal
Machine screw
Wood screw
Drill chuck capacity
kg
Weight
Drilling
Impact drilling
Switching ON
Switching OFF
Disconnect the battery
Change rotation speed - High speed
Change rotation speed - Low speed
Clockwise rotation
Counterclockwise rotation
The battery remaining power is nearly empty.
Recharge the battery soonest possible
The battery remaining power is a half.
The battery remaining power is enough.
Warning
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 53.
Standard accessories are subject to change without notice.
APPLICATIONS
<DS14DBSL / DS18DBSL>
○
Driving and removing of machine screws, wood screws,
tapping screws, etc.
○
Drilling of various metals
○
Drilling of various woods
<DV18DBSL>
○
Drilling of brick and concrete block, etc.
○
Driving and removing of machine screws, wood screws,
tapping screws, etc.
○
Drilling of various metals
○
Drilling of various woods
SPECIFICATIONS
The speci
fi
cations of this machine are listed in the Table on
page 53.
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci
fi
cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger
’
s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 2
.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See
Table 1
)
●
Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1
, according to the condition of the charger or the
rechargeable battery.
Table 1
Indications of the pilot lamp
Pilot lamp
(red)
Before
charging
Blinks
Lights for 0.5 seconds. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
While charging Lights
Lights continuously
Charging
complete
Blinks
Lights for 0.5 seconds. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
Overheat
standby
Blinks
Lights for 1 second. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
Battery overheated.
Unable to charge.
(Charging will
commence when
battery cools)
Charging
impossible
Flickers
Lights for 0.1 seconds. Does not light for 0.1
seconds. (o
ff
for 0.1 seconds)
Malfunction in the
battery or the charger
0000Book̲DS14DBSL̲Asia.indb 5
0000Book̲DS14DBSL̲Asia.indb 5
2018/02/23 14:06:31
2018/02/23 14:06:31
