HIKOKI C3605DYA, Инструкция по эксплуатации

Страница: 17 / 64

17
English
○ Lithium - ion batteries that exceed a power output of
100Wh are considered to be in the freight classi fi cation
of Dangerous Goods and will require special application
procedures.
○ For transportation abroad, you must comply with
international law and the rules and regulations of the
destination country.
○ If the BSL36B18 is installed in the power tool, the power
output will exceed 100 Wh and the unit will be classi fi ed
as Dangerous Goods for freight classi fi cation.
Wh
Power Output
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (ONLY WITH
UC18YSL3 CHARGER)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○ Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○ When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○ There may be an occasional pause during USB
recharging.
○ When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○ It may not be possible to charge some USB devices,
depending on the type of device.
ABOUT
mark and logo are registered trademarks of
Bluetooth SIG, Inc., and are used under license.
The Bluetooth device equipped with this product operates
on a 2.4 GHz frequency range. To ensure proper use,
please be aware of the following.
○ This product operates on the same frequency bands
as those for equipment such as microwave ovens,
digital cordless phones, wireless LAN systems, and
other Bluetooth equipment. To avoid radio interference
between the product and the aforementioned equipment,
keep the units separated during use.
Radio signals may not reach the product.
○ With the exception of this product’s malfunction, the
company is not responsible for any damage that may
occur from Bluetooth communication.
○ Person using a pacemaker or other medical device
should consult the manufacturer, medical institution or
distributor of the said medical electric device regarding
the e ff ects of radio frequency signals.
○ Do not use in the vicinity of automatic control devices
such as automatic doors and fi re alarms.
Radio waves from the product could a ff ect automatic
control devices and result in an accident from
malfunction.
○ Do not use the product in crowded locations as there
may be a person or persons equipped with a pacemaker
in the vicinity.
The radio waves from the product could a ff ect the
operation of a pacemaker.
NAMES OF PARTS (Fig. 1 – Fig. 40)
1
Switch
2
Switch lock
3
Cutting depth lever
4
Cover
5
Lower guard
6
Bolt
7
Washer (B)
8
Saw blade
9
Guide piece
0
Base
!
Incline lever
@
Lock lever
#
Guide fastener wing bolt
$
LED light
%
Battery
^
Hex. bar wrench
&
Handle
*
Guide
(
Mode selector switch
)
Silent mode indicator lamp
q
Battery level indicator switch
w
Battery level indicator lamp
e
Lighting mode switch
r
Lighting mode indicator lamp
t
Gear cover arrow
y
Fluorine plate
u
Flathead screwdriver
i
Hook
o
Screw
p
Cleaner
a
Hose
s
Hose tip
0000Book̲C3605DYA̲̲Ukr̲Rus.indb 17 0000Book̲C3605DYA̲̲Ukr̲Rus.indb 17 2019/01/24 11:49:39 2019/01/24 11:49:39