ASSEMBLY AND OPERATION
APPLICATIONS
○
Cutting various types of wood.
WARNING
●
Use extra caution when cutting freshly cut green
lumber, hardwood, wet wood, composite wood,
pressure treated wood, wood containing knots
or having other characteristics which may put a
heavy load on the saw or blade. If this occurs, do
not force the tool. Push the tool more slowly, but
with enough force to keep working without much
decrease in speed.
●
To avoid serious injury, do not cut the metal with
a metal cutting blade attached. Also, do not use
for applications other than wood cutting.
REMOVAL AND INSTALLATION METHOD
OF BATTERY
○
How to install the battery.
Align the battery with the groove in tool handle and
slip it into place.
Always insert it all the way until it locks in place with a
little click, If not, it may accidentally fall out of the tool,
causing injury to you or someone around you (Fig. 9).
○
How to remove the battery.
Withdraw battery from the tool handle while pressing
the latch (2 pcs) of the battery (Fig. 9).
Latch
Push
Battery
Pull out
Insert
Handle
Fig. 9
CHARGING METHOD
NOTE
Before plugging into the receptacle, make sure the
following points.
○
The power source voltage is stated on the
nameplate.
○
The cord is not damaged.
WARNING
Do not charge at voltage higher than indicated
on the nameplate.
If charged at voltage higher than indicated on the
nameplate, the charger will burn out.
1. Connect the charger’s power cord to a receptacle.
When the power cord is connected, the charge
indicator lamp will blink in red. (At 1-second intervals)
WARNING
Do not use the electrical cord if
damaged. Have it repaired immediately.
2. Insert the battery to the battery charger.
Firmly Insert the battery into the battery charger as
shown in Fig. 10.
Charge indicator lamp
Guide rail
Battery
Fig. 10
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the
charge indicator lamp will light up in green.(See
Table 1)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be
as shown in Table 1, according to the condition of the
battery charger or the battery.
13
00Book̲C3607DWA̲AUST.indb 13
00Book̲C3607DWA̲AUST.indb 13
2022/06/10 14:51:29
2022/06/10 14:51:29
