18. Carefully handle power tools.
Should a power tool be dropped or struck against
hard materials inadvertently, it may be deformed,
cracked, or damaged.
19. Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner benzine, carbon
tetrachloride, and alcohol may damage and crack
plastic parts. Do not wipe them with such solvents.
Wipe plastic parts with a soft cloth lightly dampened
with soapy water and dried thoroughly.
20. Never wear gloves made of material liable to roll
up such as cotton, wool, cloth or string, etc.
21. Keep motor air vent clean.
The tool’s motor air vent must be kept clean so that
air can freely
fl
ow at all times. Check for dust build-up
frequently.
22. NEVER leave tool running unattended. Turn
power o
ff
.
Don’t leave tool until it comes to a complete stop.
23. NEVER
touch the blade with bare hands after
operation.
24.
Because the cordless circular saw operates by
battery power, be aware of the fact that it can begin to
operate at any time.
25.
When working at elevated locations, clear the area of
other people and aware of conditions below you.
26.
Do not give a strong shock to the switch panel or
break it. It may lead to a trouble.
27.
Do not use the product if the tool or the battery
terminals (battery mount) are deformed.
Installing the battery could cause a short circuit that
could result in smoke emission or ignition.
28.
Keep the tool’s terminals (battery mount) free of swarf
and dust.
○
Prior to use, make sure that swarf and dust have not
collected in the area of the terminals.
○
During use, try to avoid swarf or dust on the tool from
falling on the battery.
○
When suspending operation or after use, do not leave
the tool in an area where it may be exposed to falling
swarf or dust.
Doing so could cause a short circuit that could result
in smoke emission or ignition.
29.
Always use the tool and battery at temperatures
between -5°C and 40°C.
IMPORTANT SAFETY INSTRUCTIONS
FOR USE OF THE BATTERY AND
BATTERY CHARGER
You must charge the battery before you can use the power
tool. Before using the model UC18YSL3 battery charger,
be sure to read all instructions and cautionary statements
on it, the battery and in this manual.
CAUTION
USE ONLY HiKOKI BATTERY TYPE MULTI VOLT
SERIES. OTHER TYPES OF BATTERIES MAY
BURST AND CAUSE INJURY!
Follow these instructions to avoid the risk of injury:
WARNING
Improper use of the battery or battery charger
can lead to serious injury. To avoid these injuries:
1.
NEVER
disassemble the battery.
2.
NEVER
incinerate the battery, even if it is damaged or
is completely worn out. The battery can explode in a
fi
re.
3.
NEVER
short-circuit the battery.
4.
NEVER
insert any objects into the battery charger’s
air vents. Electric shock or damage to the battery
charger may result.
5.
NEVER
charge outdoors. Keep the battery away
from direct sunlight and use only where there is low
humidity and good ventilation.
6.
NEVER
charge when the temperature is below 0°C or
above 40°C.
7.
NEVER
connect two battery chargers together.
8.
NEVER
insert foreign objects into the hole for the
battery or the battery charger.
9.
NEVER
use a booster transformer when charging.
10.
NEVER
use DC power to charge.
11.
NEVER
store the battery or battery charger in places
where the temperature may reach or exceed 40°C
such as inside metal box or car.
12.
NEVER
expose the battery or battery charger to rain
or wet conditions.
13.
ALWAYS
operate charger on standard household
electrical power. Using the charger on any other
voltage may overheat and damage the charger.
14.
ALWAYS
wait at least 15 minutes between charges to
avoid overheating the charger.
15.
ALWAYS
disconnect the power cord from its
receptacle when the charger is not in use.
7
00Book̲C3607DWA̲AUST.indb 7
00Book̲C3607DWA̲AUST.indb 7
2022/06/10 14:51:29
2022/06/10 14:51:29
