14
English
Approx. 32 minutes (BSL36A18), but the charging time may vary according
to the ambient temperature.
4. Disconnect the charger’s power cord from the receptacle.
5. Hold the charger firmly and pull out the battery.
NOTE:
After operation, pull out batteries from the charger first, and then
keep the batteries properly.
6. About remaining battery indicator
When pressing the remaining battery indicator switch to light the indica-
tor lamp, the indicator will shut off approximately 3 seconds. It is best to use
the remaining battery indicator as a guide since there are slight differences
such as ambient temperature and the condition of the battery.
State of lamp
Battery Remaining Power
Lights:
The battery remaining power
is over 75%.
Lights:
The battery remaining power
is 50-75%.
Lights:
The battery remaining power
is 25-50%.
Lights:
The battery remaining power
is less than 25%.
Blinks:
The battery remaining power
is nearly empty. Recharge the
battery soonest possible.
Blinks:
Output suspended due to
high temperature. Remove
the battery from the tool and
allow it to fully cool down.
Blinks:
Output suspended due to
failure or malfunction. The
problem may be the battery,
please contact your dealer.
