4
HIGHWAY EQUIPMENT COMPANY
G
4
305438-SP-A
Page Rev. A
SPINNER ASSEMBLY INSTALLATION CONTINUED
LH RH
5.
Make sure the fins are installed on the
spinner discs correctly. Position all fins in
the position 2 as shown in Figure C.
6.
Set spinner RPM at 550-575 for compost
initially. These settings can be found using
the controller in the cab. The spinner
sensor will measure the spinner’s speed.
Figure C – Fin Location for 34” Conveyors
7.
Slide the slots of the material divider (Item
8) onto both sills so material divider’s
mounting tab rests on sills’ flanges. Align
two holes on outside of each sill with
material divider holes, insert capscrews
and loosely attach washers, lock washers
and nuts. Secure mounting tab to sill’
flanges with capscrews, lock washers and
nuts. Tighten all hardare.
Figure D – Material Divider Installation
