HightPoint Technologies RocketStor 6314A, Руководство пользователя

Страница: 12 / 61

12
UNLIT 
Unit is powered OFF
 Disk tray is empty
Shutting Down the RS6314A
The 6314A enclosure will automatically power down when your computer is turned off. For
turning off the 6314A safely without shutting down your PC, take the following steps:
1.
Eject the drive from OSX

Right Click the drive and click Eject

Double click the drive and click the Eject button for the drive under devices
2. Check the front panel LED lights to make sure there is no disk I/O activity
3. Switch the power switch on the back panel OFF (O is pushed down) or unplug the
Thunderbolt™ cable.
Important : Do not move or tilt the enclosure until disk activity has completely stopped to
prevent physical damage of hard drives.
Daisy Chaining the RS6314A
Daisy chaining means you are connecting multiple devices in a series in an effort to expand
your storage without using more PC ports. Up to 6 Thunderbolt™ devices can be daisy chained
together.
Figure 7. Sample daisy chain configuration.. RS6328L connected to RS6314A connected to
another RS6314A (left to right)
1. Plug in one end of Thunderbolt™ cable to your Mac, and the other end to a RS6314A
Thunderbolt™ port.
2. Plug in one end of another Thunderbolt™ cable into the unused port, and the other end of
the cable into the next Thunderbolt™ device.
Note : Wait at least 20 seconds for the device to be detected by the system.
Important : Chaining SIX RS6314A enclosures DOES grant you access of up to 24 hard drives,
but DOES NOT allow you to create a single RAID array using all 24 drives. Each RS6314A
enclosure has its own RAID controller that detects only the 4 hard drives connected to it.