28
Disabling SMART monitoring
You have the option to disable SMART monitoring on each individual disk:
1.
Select the proper controller using the drop down menu on the top left.
2.
Click the
SHI
tab.
3.
Click
SMART
on desired disk.
4.
Click
Disable.
Note
: Disabling SMART will prompt the Storage Health Inspector to change the disk
status
to ‘Failed’. The
RocketRAID alarm will
not
alert you when this setting is disabled.
Any potential warnings related to S.M.A.R.T attribute technology will not trigger.
Changing HDD Temperature Threshold
To ensure hard disk temperatures remain cool, enable SMART to monitor disk
temperatures. In
SHI
, you can set a threshold so that the WebGUI or controller alarm (if
enabled) can warn you when physical disks get too hot.
1.
Log in to WebGUI.
2.
Select the controller from the drop down on the top left.
3.
Click
SHI.
4.
Type the desired harddisk temperature threshold (
°
𝐹
).
5.
Click
Set.
Utilizing the Health Inspector Scheduler
The
Health Inspector Scheduler
(
HIS
) enables you to periodically check your
disk/arrays to ensure they are functioning optimally.