27
For
Mac
Users:
1.
Open a
terminal
window on the host computer (computer that is connected to the
devices.)
2.
Type ifconfig
.
3.
Look for the connection that has
status
:
active
4.
Write the IP address located after
inet
:
Figure. Example: en2 has active status, the IP is 192.168.1.254
Storage Health Inspection (SHI)
The Storage Health Inspector (SHI) monitors each individual disk’s
health. Monitoring
disk SMART attributes can prevent critical RAID failures from occurring.
This section covers the following:
•
Enabling SMART Monitoring
•
Disabling SMART Monitoring
•
Changing HDD Temperature Threshold
Enabling SMART Monitoring
To access the SMART attributes of an individual disk:
1.
Log in to WebGUI (default
user
: RAID
password
: hpt).
2.
Select the proper controller using the drop down menu on the top left.
3.
Click the
SHI
tab.
4.
Click
SMART
on the desired disk.
5.
Click
Enable
to enable SMART monitoring.