4.
After installing the adapter, close and secure the system chassis.
5.
Install the hard disk drives into the external disk enclosure (sold separately –
consult the enclosure’s manual for the proper hard disk installation procedures).
Attach the enclosure to the RocketRAID 152x’s eSATA ports using the eSATA
data cables.
3 - Verifying Installation
Once the RocketRAID 152x host adapter and hard disks have been installed, boot-up
the system to verify that the hardware is properly recognized.
1.
Power on the system. If the system detects the presence of the adapter, the
RocketRAID 152x BIOS Utility will be displayed during bootup.
2.
Press Ctrl+H to access the RocketRAID 152x BIOS Utility.
The BIOS Utility will display information about hard disks attached to the adapter.
Make sure all attached disks are detected by this utility. If any of the hard disks are
not detected, power down the system and check all cable connections.
RocketRAID 152x Hardware Description/Installation
2-3
