HIGHLEAD HLK-3020, Инструкция и каталог запасных частей

Страница: 6 / 45

—
4
—
Needle bar stroke
：
56mm
Thread take up lever stroke
：
96mm
Class of needle
： DY×3 26#
(the standard specification)
Presser foot lift
：
20 mm
Presser foot alternation
：
Variable from 4mm to 10mm
Work holder lift
：
30mm
Hook
：
Large size shuttle hook
Lubrication system: Manual oiling and replenishment with the oil wicks from the oil tanks
Lubrication oil
：
SF sewing machine oil
X—Y drive system
：
Stepping motor, timing belt and linear guide rail drive
Intermittent or continuous feeding
Machine dimension
：
1,200mm (W) × 1,100mm (L) × 1,300mm (H)
Net Weight: 130kgs
Main motor: 750W
3. INSTALLATION
Caution
★
The machine should be installed by the specialists who have enough experience for the sewing
machine installations
．
★
All the necessary electric wiring should be done by electric engineers who are qualified for electric
wiring
．
★
If any damage or fault is found on the machine at the installation
，
please do not operate until it be
repaired
．
★
Please do not operate the sewing machine with excessive modifications from the standard
specification.
3-1 . Installation of the control box
If the control box is purchased without
assembling to the table, the control box
has to be installed underneath the table.
Please install the control box with the
instruction in the paragraph.
3-2.Installation of the power switch
If the power switch is purchased
without assembling to the table
，
the
power switch has to be attached with
the following procedure
．