Highland HIX604B1, Инструкция по использованию и уходу

Страница: 9 / 21

9
USE OF THE APPLIANCE
Display
Display Designation Description
0 Zero The heating zone is activated.
1…9 Power level Selection of the cooking level.
U No pan detection No pan or inadequate pan.
A Heat accelerator Automatic cooking.
E Error message Electronic failure.
H
P
Residual heat
1
st
Booster
2
nd
Booster
The heating zone is hot.
The 1
st
Booster is activated.
The 2
nd
Booster is activated.
U Keep warm Maintain automatically of 42, 70 or 94°C.
II Stop&Go The cooktop is in pause.
Grill Function The Grill Function is activated.
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed. The ventilation
starts with a high speed when the cooktop is used intensively. The cooling fan reduces speed
and stops automatically when the electronic circuit is cooled.
STARTING-UP AND OPTIMUM USE
Before the first use
Clean your cooktop with a damp cloth and dry the surface thoroughly. Do not use detergent which
risks causing blue-tinted colour on the glass surface.
Induction principle
An induction coil is located under each cooking zone. When it is engaged, it produces a
variable electromagnetic field which produces inductive currents in the ferromagnetic base of
the pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be magnetic:

All ferromagnetic pans are suitable (please verify by using a small magnet): cast iron
and steel pans, enamelled pans, stainless-steel pans with ferromagnetic bases.

Exclusions: copper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware.
The induction heating zone adapts automatically to the size of the pan. If the diameter is too
small, the pan doesn’t heat-up. This diameter will vary the function of the heating zone
diameter. If the pan is not adapted to the induction cooktop the display will show [ U ].
Sensitive touch
Your ceramic cooktop is equipped with electronic controls with sensor touch controls.. When your
finger touches the key, the corresponding command is activated. This activation is validated
by a control light, a letter or a number in the display and/or a “beep” sound.
During normal use only touch one sensor key at a time.