High Power EP 949, Инструкция по эксплуатации

Страница: 15 / 21

15

Things You Should Know Before Exercising
A. The values calculated or measured by the computer are for exercise purpose only, not for medical purpose .
B. The Variables May Need To Change In The Programs:
Programs Variables
P1 ~ P7 TIME, DISTANCE, AGE
P8 GENDER, HEIGHT, WEIGHT, AGE
P9 TIME, DISTANCE, TARGET H.R.
P10 ~ P12 TIME, DISTANCE, AGE
P13 ~ P16 TIME, DISTANCE, AGE, 10 Intervals
P17 TIME, DISTANCE, WATT, AGE
Please note that only 1 value of TIME or DISTANCE can be adjusted. Both adjustments do not exist at the
same time. For example, the value of DISTANCE is “0.0” while the value of TIME is adjusted to be any
number except “00:00”.
C. Programs Selection:
There are 17 programs with 1 Recovery including 1 Manual Program, 6 Preset Programs, 1 Body Fat Program,
4 Heart Rate Control Programs, 4 User Setting Programs, 1 Speed Independent Program, and 1 Pulse Recovery
Measuring.
D. Program Graph:
Each graph shown is the profile of the loading in each interval (column). With the value of TIME counting
up, each interval is 3 minutes that all the columns make up 30 minutes. With the value of TIME counting
down, each interval is the value of setup TIME divided by 10. For example, if the time value is setup to 40
minutes, each interval will be 40 minutes divided by 10 intervals (40/10=4). Then, each interval will be 4
minutes. The following graphs are all the profiles in the monitor.
Program 1 (Manual) Program 2 (Polling)
Program 3 ( Valley ) Program 4 (Fat Burn )
Program 5 (Ramp) Program 6 (Mountain)
Program 7 (Random) Program 8 (Body Fat)