18
GF502 VOIP PHONE
Line1 Switch
: Enable or disable this line’s register.
Line1 Dial plan
: Set the sequence of this line’s dial plan.
Username
: Username of your SIP account (Commonly the same as the phone number).
Display Name
: The display name sent to callee, if sip provider doesn’t send a caller ID, this will
be shown on the LCD of callee.
Auth name
: Commonly the same as the phone username.
Password
: Password of your SIP account.
Server Addr
.: Register address of SIP server and port.
Realm/Domain
: SIP domain. Enter the sip domain if you know, otherwise the GF502 VoIP phone
will get the domain from signal maybe it is not correct.
Proxy Require
: Some SIP service need this parameter.
Register Interval
: Register expires time. The GF502 VoIP phone will auto configure this expire
time to the server recommended setting if it is longer from the SIP server.
Heartbeat Interval
: Send heartbeat pack periodically to keep the channel.
Options Interval
: Send option signal to SIP server periodically to detect if the SIP server is
available.
Line1 DTMF Parameters
: DTMF signal sending mode and pay load. Support Inband, RFC2833
and Info.
Line1 Codec PRI
: Setting the prefer codec in order. Support G729, G723, PCMU(G711u) and
PCMA(G711a).
Содержание GF502
