8
GF502 VOIP PHONE
Chapter 2: Install the GF502 VOIP Phone
This section provides instructions for installing the GF502 VOIP Phone. Before you perform
the installation, be sure you have met the following prerequisites:
¾
Planned the network and GF502 VOIP Phone configuration.
¾
Installed and configured the other network devices.
¾
10BASE-T or 100BASE-T or better Ethernet cable. One cable is needed for each
Ethernet connection.
1
After you install a phone, even if it is new, upgrade the phone to the current firmware image.
For information about upgrading, refer to Chapter 4.
◎
The Connects of the Box
The GF502 IP Phone includes these components on the phone or as accessories for the
phone:
Standard:
¾
Telephone base unit
¾
Bracket
¾
Handset
¾
Handset cord
¾
5V Power adaptor
Optional:
¾
RJ-45 Ethernet cable
¾
Headset
¾
CD
¾
User's manual
◎
Installation procedure
Step 1
Fix the bracket to the back of phone, connect the handset with phone base unit using the
handset cord.
Step 2
Connect one end of a standard RJ45 Ethernet cable to the LAN port on the rear panel of
the GF502 VOIP Phone. Connect the other end to your IP network device such as a hub,
switch or directly to the Network. If your phone supports Power over Ethernet (PoE) ,
the GF502 VoIP IP phone can be powered from a switch via Ethernet cable, in which
case the external power adaptor is not needed.
Step 3
(Optional) Connect one end of a standard RJ45 Ethernet cable to the PC port on the rear
panel of the GF502 VOIP phone. Connect the other end to your PC.
Содержание GF502
