High Great HG TAKE, Руководство пользователя

Страница: 10 / 39

Replacing the Propeller Blades
Blades must be replaced with ones that spin in the same direction. Blades
with an “H” on top must be replaced with ones that also have an “H”
；
Blades
with a “G” on top must be replaced with ones that also have a “G”
，
as in the
above figure.
How to replace the propeller blades:
Use a wrench or a screwdriver to loosen the screws, remove the old ones
and mount the new ones onto the base, as shown in the following figure:
-------------------------------------------------------------------------------------------------------------------------------------------------------
Please ensure that the propeller is tightly screwed in, to prevent
against the screws coming loose and the propellers blades coming off
during flight. It will need to be retightened after every 10 hours of
flight.
-------------------------------------------------------------------------------------------------------------------------------------------------------
Battery
The battery is designed specifically for use with HG TAKE. It has a rated
capacity of 1450mAh and a nominalvoltage of 11.4V.
The battery’s major characteristics are as follows:
◎
Balance Charging Protection: automatic balance of the battery’s
internal cell voltage to preserve the battery;
◎
Overcharge Protection: Overcharging can seriously damage the
battery. The battery will stop charging once it’s charged to13.05V;
◎
Over-discharge Protection: Over-discharging can seriously damage
the battery. The battery will cease output once it’s discharged to 4.6V;
◎
Short-circuit Protection: The battery will cease output to protect itself
once short circuit occurs.
Before using HG TAKE, ensure that the battery is fully charged. For more
details about charging the battery,please refer to “Charging the Battery” on
page 10.