CAUTION
Always consider consulting a professional audio installer before
installing any audio components. Be careful and take your time.
Do not let wires make contact with metal edges or hot engine
components.
U-Bracket Mounting
Controls
1
2
3
4
5
6
3
1
2
4
5
5
6
7
8
9
10
11
12
Break Joints
Mounting Surface
U-Bracket
Mounting Nuts
Radio Antenna
USB Connector
Red - Front RCA Output (R)
White - Front RCA Output (L)
Red - Rear RCA Output (R)
White - Rear RCA Output (L)
Red - RCA Input (R) AUX 1
White - RCA Input (L) AUX 1
Red - RCA Input (R) AUX 2
White - RCA Input (L) AUX 2
Accesory
+12 V
olts
White - Front Left (+)
White/Black - Front Left (-)
Gray - Front Right (+)
Gray/Black - Front Right (-)
Green - Rear Left (+)
Green/Black - Rear Left (-)
Purple - Rear Right (+)
Purple/Black - Rear Right (-)
Black - Ground (-)
Blue - Remote Output
Wiring
Power On / Off / MUTE – The power button is a multi-function button, depending on
how long you hold the button. One Quick press of the power button when the unit is
off, will turn it on. One Quick press of the power button when the unit is on will mute the
output. Press and hold turns power off.
Audio Mode – Press the button quickly, to see show ‘SEL’ on the screen. Then with
quick presses scroll through each of the audio functions: BASS, TRE, BAL, FAD,
LOUD, EQ, BEEP, and regional radio settings (PREA EUR/USA) under FM/AM mode.
Each function is adjusted using the # 5 button VOL Up/Down.
APS – In FM or AM Mode, Press the button quickly to scan stored radio stations. Press
and hold to automatically scan all stations programmed with a short audition of each.
Press the button again to stop the scan.
MOD – This is your input mode switch. Press to scroll through your various inputs FM,
BT, IPOD, USB, AUX1, and AUX2.
VOL – Volume Up / Down. Press quickly for small increments in volume, hold down for
quicker adjustments.
BND / Clock – This multi-function button when pressed quickly, scrolls between your
FM1, 2 and 3 plus AM1 and 2 banks for programmed stations.
Press and hold button 6 to enter clock mode. Press button 6 once more to enter clock
adjust mode. Pressing it once more will toggle between hours and minutes. Use the
Vol^ and Vol˅ buttons to adjust the time.
RWD / Back – This multi-function button works with your music sources. In radio mode,
quickly press to go back to the next strongest station.
For other sources, press quickly to go back to the beginning of the current song, press
twice to go back to the beginning of the previous track. Press and hold for fast reverse
within the current selection.
7
Discover other marine electronics & navigation on our website.
Direct Screw-Type Mounting
1. Use a small flat head screw driver under the edge of the button door and apply
upward pressure until the button panel’s clips release and it lifts up.
2. Pull door away from the radio until it is detached from the radios face plate.
3. Position the radio in the location that is desired.
4. Use the screws included and screw the unit in place.
5. Reinstall the button doors.
