Hifonics Thor TRX4004DSP, Руководство пользователя

Страница: 29 / 40

29
FUNCTIONAL INSTRUCTIONS
2. SOURCE :
• Here you can choose between the different input sources SPDIF (optical input), MAIN (RCA audio inputs), AUX (RCA stereo input)
and WiFi (optional).
3. CH-SETTING :
• Here you select the particular output channels or output channel pairs in which you want to change the settings.
You have the option to link the respective channel pairs for L and R with the lock symbol in the middle to synchronize the settings for
both channels. With L-> R COPY you can also copy the setting of the currently selected left channel to the right channel.
4. CROSSOVER :
• Here you can select the required filter type ( FILTER TYPE OFF , HP , BP or LP )
and set under FREQUENCY the desired cut-off frequency. The sliders only work
when the particular filter type is activated. As soon a filter type is selected, it will be
displayed graphically under point 8.
Note: If you have selected a filter type, the cut-off frequency can also be changed
under point 8 with the mouse. Click and hold the red dot and move the cursor to
the desired location on the frequency band.
• Hint: Instead of using the slider, you can also type in the cut-off frequency directly
with the keyboard after a double click on the values below
FREQUENCY
.
Confirm by pressing ENTER .
5. GAIN :
• Here you can reduce the level of the individual Outputs A – H from 0dB to -40dB. With MUTE you can mute the respective channel.
If necessary, you can use MUTE under MAIN to mute all output channels.
• In addition, under MAIN , the total output level of the DSP amplifier (-40dB to + 12dB) can be adjusted.
Attention: Use this control with caution. Too loud level could seriously damage your speakers.
6. DELAY :
• Here you can adjust the time delay and phase shift of the individual Outputs A – H . For each output channel channel you can indi-
vidually set the time delay of the signal under DELAY . Above PHASE , the unit of delay can be switched between ms (milliseconds)
and cm (centimeters).
Hint: Instead of using the slider, you can also type in the value directly with the keyboard after a double click on the values above the
sliders. Confirm by pressing ENTER .
• Below the sliders you can switch the phase from 0° to 180 ° individually for each channel.
• With these two functions you can match your sound system to the vehicle acoustics and adjust the acoustic stage perfectly.
7. HP SLOPE / LP SLOPE - CONFIGURATION OF SLOPE :
• Select under HP/SLOPE the desired slope of the high-pass filter and under LP/SLOPE the slope of the low-pass filter, which is selec-
table in 6dB steps, starting from 6 dB per octave (very flat) to 48 dB per octave (very steep).
Note: The HP/SLOPE or LP/SLOPE control panel is inactive (gray), if under 4. CROSSOVER HP , LP and BP is not selected.
8. FREQUENCY BAND PREVIEW :
• The frequency band shows graphically the envelope of the 31-band equalizer (point 9) and the currently selected settings of the
output channel or output channel pair from point 3.
9. 31-BAND EQUALIZER :
• With the sliders below you can set the desired dB value (-18 to +12) between 20 Hz to 20000 Hz for each output channel (except
subwoofer channels G & H: 11-band equalizer 20 Hz - 200 Hz).
Below the individual sliders you can enter the Q (quality) as numeric value (0.5 for very shallow to 9 for very steep).
With ByPass you can switch off the Equalizer function.
Press the RESET button to reset all Equalizer settings to default (All other settings are not affected by this).