27
FUNCTIONAL INSTRUCTIONS
If the test was performed successfully 4 checkmarks in the check boxes appear. Then press
[OK] Click here to start
to continue.
Should one of the checkmarks not appear, a problem occurred that can lead to a malfunction.
Please refer to the information in the
Trouble Shooting
section.
The configuration screen will appear next. Here you can determine how many RCA audio inputs
you want to assign to the DSP unit and how these signals should be routed to speaker outputs.
Select under
Create New Setting
:
-
YES
to create a new setting.
Confirm the message
Reset all Settings
with
OK
.
-
NO
to keep the existing setting.
Under
Delay Unit
you can select the unit of time delay. Choose between centimeters [cm] or
milliseconds [ms].
Channel Matrix
Under
INPUT MODE
you can configure the input channels of the amplifier according to the
RCA audio inputs you‘ve connected.
Please make a choice:
-
2CH
,
4CH
or
6CH
according to the RCA cables you are using
-
Mix.
This function generates a sum signal of the
LINE IN
and
SUB IN
RCA audio inputs
Under
OUTPUT MODE
you can assign the inputs to the corresponding outputs.
With
1
,
2
or
3
(only available with
INPUT MODE 4CH
and
6CH
) you can choose a suitable
configuration.
Then click
OK
to continue.
Содержание Thor TRX4004DSP
Страница 38: ...38 NOTES...
Страница 39: ...39 NOTES...
