1. Sauna heater Specifications
Product Not Including Sauna
Stone
Sauna Room Size
Min. Distance to heater
CBM
Height
A
Min.mm
C
Min. mm
D
Min. mm
Model
Power
Min.
Max.
cm
Hidro-HX45B
4.5 kw
3
6
110
80
280
100
Hidro-HX60B
6.0 kw
5
9
110
100
280
150
Hidro-HX80B
8.0 kw
8
12
110
130
300
200
Hidro-HX90B
9.0 kw
9
13
110
130
300
200
2. Installation
Install the sauna heater onto the wall with the screw provided in the heater, according to the minimum safety
distances and volumes indicated in table 1 and figure 1, or on the plate of the heater.
1) The heater can be installed in the
wall recess at the minimum height of
1900mm.
2) Do not cover the wall behind the
heater with materials like asbestos or
eternity plates etc., because this sort of
covering protection could cause too
temperature and a risk of burn.
3) Must use qualified materials for the
walls and ceiling.
3. Guard Rails
Please follow the minimum distances requirements in
figure 2 if guardrails are desired around the heater.
4. Digital display Controller
This controller is splash proof. You can install it near the sauna room. Temperature detector must install on
inside room wall. please install according to the diagram to prevent burning the wood wall.
Table 1
Figure 1A
Figure 2
Figure 1B
1. Time
2. Temperature
3. Power-on by alarm
4. Power-off by alarm
5. Light power switch
6. Confirm button of timing
Note:
1. Temperature setting range: 35
℃
~120
℃
.
2. Once the detedcted temperature exceed the target
temperature, the machine will stop heating.
3. If the detected temperature exceed 120
℃
, the
machine will enter the ultra-high temperature
protection, will not heating. If exceed 140
℃
, the
machine will cut off the power automaticlly, and the
