8
9
MA-EN-DESCALCIFICADOR KOBE (USR) UF-3004-XX JD18V01
MA-EN-DESCALCIFICADOR KOBE (USR) UF-3004-XX JD18V01
1. Drainage
2. Suction / Brine
3. Water to be treated inlet
4. Treated water outlet
• This system is designed to be connected to 1” tubing.
• The softener’s valve’s inlet and outlet connection are indicated by their corresponding
direction arrow.
•
The salt tank’s drainage and overflow connection lead to the drain. Both connections will be
independent and have a direct discharge to avoid anything returning.
•
The inlet and outlet connections to the pipeline are carried out using flexible tubes which
must comply with current regulations to avoid tension and possible breakages of the valve’s
Noryl® head.
• It is recommended to previously install a clarifying valve to protect the valve, the resin and
the installation itself from suspended matter, impurities, sand, etc. which are common in the
distribution network, drilling waters, either on the surface or underground.
5.3.- Connecting the system to the water intake
5.3.1 Inlets and Outlets
Accessories:
1. Manual
2. Transformer
3. Inlet/outlet connector set
4. Drainage connector
5. Bypass (optional)
5.2.- Diagram
Typical diagram of a domestic installation and the location of its components.
The company HIDRO-WATER, S.L.U. will not be held responsible if the
installer or user fails to obey the guidance found in this manual
Bypass system is standard on
the following models:
UF-3004-07 / UF-3004-08 / UF-3004-09
Optional on the rest of models
View
Whitout By-pass CLACK
With By-pass CLACK
Id Description
1 Inlet of water to be treated
2
Inlet filter valve
3
Bypass filter valve
4
Outlet filter valve
5
Sediments filter
6 Kobe softener
7 General bypass valve
8
Softener outlet valve
9 Drainage line
10
Overflow line
11 Drain
12 Treated water outlet