HIAB J14S Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 62

background image

NOTE

Hiab shall at all times have the right to:

• install, maintain and dismantle remote diagnostics tools or similar sensor-based

connectivity capabilities (“Connectivity”) in and from the Equipment; and

• access, send, receive, collect, store and use any and all information and data

gathered  through  the  Connectivity,  including  but  not  limited  to,  information
concerning  efficiency,  availability,  downtime,  operation,  operating  environment,
movement,  condition,  logon,  location  and  similar  information  relating  to  the
Equipment (the “Information”). Such Information may be used for optimizing the
Equipment,  or  any  related  equipment  or  services  as  well  as  for  Hiab's  internal
business  and/or  operating  purposes.  Hiab  shall  be  responsible  for  complying
with applicable laws and regulations related to such Information.

The  customer/user  shall  not  in  any  way  remove,  disable,  or  interfere  with  the
Connectivity  or  the  Information.  Any  intellectual  property  rights  or  other  right  and
title  in  and  to  the  Connectivity  features  and  the  Information  and  all  their  further
developments shall at all times be and remain the exclusive property of Hiab.

1.1.2. Description of Hiab J14S and J24S

The  Hiab  J14S  and  J24S  utility  loaders  manufactured  by  Hiab  are  designed  for  several  truck
mounted  applications  where  grapple  type  attachment  is  to  be  utilized.  Typical  applications  would
include  railroad  Hi-Rail  trucks  or  grapple  trucks  for  waste  and  recycling  material  handling.
Installation can be done either as rear mounted or behind the cab. Utility loaders are not intended

for hook operation

.

The Hiab J14S and J24S are available for various applications in different boom versions and with
wide range of options and accessories

On the serial number plate, you can find information on the loader type and on the manufacturer.

NOTE

The exact technical information for your loader is shown in "Technical Data".

1.2. Indications in the Operator’s Manual

What must you do and not do?

The following indications are used in the Operator’s Manual:

DANGER

Danger to life for yourself or to bystanders.

Follow the instructions carefully!

Introduction

HIAB J14S J24S

7

«
...
5
6
7
8
9
...
»

Содержание J14S































































Отзывы:

Нет отзывов

Похожие инструкции для J14S

Бренд: OMCA Страницы: 72

Бренд: MAHLE Страницы: 21

Бренд: Hammer Strength Страницы: 18

Бренд: EuroLite Страницы: 28

Бренд: Landoll Страницы: 70

Бренд: Landice Страницы: 19

Бренд: Landice Страницы: 7

Бренд: PAS Systems International Страницы: 24

MARK V Alcovisor

Бренд: PAS Systems International Страницы: 20

Бренд: PARRY Страницы: 14

Бренд: York Fitness Страницы: 36

INTRA PROPHYwiz 181 P

Бренд: KaVo Страницы: 22

Бренд: Festo Страницы: 40

Бренд: Neurotech Страницы: 24

XMLT-24ELED-200CA8-1

Бренд: DS Produkte Страницы: 28

Бренд: B&G Страницы: 16

Бренд: Maquet Страницы: 232

Бренд: Eurotops Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды