HE-MP883G User Manual
Please visit us online at
www.hittusa.com
to check if an updated manual is available
Page 35
directly be copied to the PMP by dragging and dropping or copying and pasting.
The PMP screen will display USB icon and MSDC character, indicating it is available for use.
During data transfer (green light) on the PMP will flash. After data transfer is over the green
light will turn solid.
Important:
While uploading or downloading files, don’t disconnect the USB cable, to prevent data loss
due to corruption of your PMP’s storage media; requiring you to reformat it.
Note:
If you
need to reformat the storage media make sure to format it with FAT and not FAT32
format. After formatting is done, the system will create the default folders after you
turn the PMP OFF and then ON again.
Whenever you disconnect the PMP from the computer, make sure that data transfer
operation is completed (the green LED should be solid and not blinking)
For Windows 98SE Operating System, you must use “Remove the hardware Safely” option
before disconnecting the PMP from PC to prevent data loss.
Disclaimer
：
Power Outage during data transfer between the PMP and PC may cause data
loss; please adopt data backup best practices. The company is not liable for
any data loss.
10. Video & Photo Conversion Software:
I) Install Video/Image Conversion Software
Insert CD labeled DRIVER into your computer’s CD-ROM drive and open Folder named
ENGLISH and then sub- folder named ASF CONVERT TOOL. Then pick appropriate
sub-folder WIN98-ME (if you have Windows 98SE or ME on your PC) or WINNT-2000-XP
(if you have Windows NT, 2000 or XP on your PC), click “SETUP.EXE” file to launch
installation program, please see figure below:
