Hi-Spec Xcel 1250 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 27

Hi-Spec Xcel 1250 Скачать руководство пользователя страница 7

Hi-Spec Xcel 1250

Operators Manual

Hi-Spec Engineering reserves the right to make changes or improvements at any time without incurring any obligation to

make such changes on products sold previously.

7

Safety Decals

The decals consist of a picture representing the danger and a picture to show

how to avoid it.

  You will find these signs located near specific hazards on your machinery.
  Please pay attention to these signs for your own safety.
  Safety signs should be maintained and replaced when necessary. They must

be kept clean and clearly legible.

If you need a replacement sign or have lost your user manual you must not

operate the machine. Please contact your Hi-Spec authorised dealer or Hi-
Spec Engineering directly and we will issue you a replacement.

Warning

Always read the operating manual and safety instructions

before use.

Warning

When the machine is operating stones or other objects can

cause injures. Always keep a safe distance.

Warning

After the first operating hour and then every 25 operating

hours, check tyre pressure and tighten wheel nuts.

Warning

PTO shafts can cause serious injury or death. Stay out of

range of shaft and wear close fitting clothing.

Warning

When the machine is moving never stand between the

tractor and the manure spreader.

Warning

Touching any rotating parts can cause serious injuries.

Always keep a safe distance when machine is operating.

Warning

Fingers can be cut off between belts/chains and gearwheels.

Always ensure safety guards are in place.

Warning

Gearwheels and rotating parts can cause serious injuries.

Never touch rotating parts when the machine is operating.

Warning

Maximum PTO speed for this machine is 1000 rpm.

«
...
5
6
7
8
9
...
»

Содержание Xcel 1250




























Отзывы:

Нет отзывов