Hi-Spec Xcel 1250 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 27

Hi-Spec Xcel 1250 Скачать руководство пользователя страница 15

Hi-Spec Xcel 1250

Operators Manual

Hi-Spec Engineering reserves the right to make changes or improvements at any time without incurring any obligation to

make such changes on products sold previously.

15

Spreading solid material

1. Open slurry door fully.

2. Adjust the flow control valve to the required setting.

3. Switch ‘On’ flow control override until the material reaches the shredding shaft.

Switch ‘Off’ to begin spreading.

4. The amount spread is controlled by the forward speed of the tractor and the flow

control setting.

5. When load is almost empty switch ‘On’ the flow control override and lower the slurry

door to the material height. This prevents material being spread forward over the
tractor.

Spreading flow-able material (slurries, sewage pellets etc.)

1. Use the slurry door opening and the forward speed of the tractor to adjust the

amount being spread.

2. Set the flow control valve at the lowest setting.

Always turn off and disconnect flow control override

switch when parking overnight.

«
...
13
14
15
16
17
...
»

Содержание Xcel 1250




























Отзывы:

Нет отзывов