1.
ASSEMBLY INSTRUCTIONS
1.1
Carefully take the bicycle out of the box and remove all bubble wrap and other protective elements.
If the box is badly damaged, please take pictures and contact us immediately as we will use this to file a
claim with the shipping company IMMEDIATELY.
The bike will typically ship in two packages with your complete bike in the large package and your front
wheel, pedals, quick release, and charger in the second smaller e4rpackage inside the large bike box itself.
1.2
Look carefully inside the box for your pedals (L=left, R=right) and front wheel quick release.
“L” goes on the left side and “R” goes on the right side.
MAKE SURE YOU PUT THE THREAD IN
CORRECTLY. It is always advised to use a proper pedal wrench to tighten the pedals properly.
HPC will
NOT be responsible for stripped pedals
. Right pedal has a traditional right hand thread, while the Left
pedal has a left hand thread.
1.3
Next, secure the front wheel into the front suspension dropouts with included 20mm through axle.
Step 1: Turn the non-drive side wedge expander counter clockwise until it no longer clicks.
